High Output EPE Foam Sheet/Film/Board Recycling Machine
Description
The waste scarp of EPE foam sheet/film/board can recycle and use again.
The scrap can directly crush and recycled,no need any other accessory machine.
I. Major Parts
Steel rack structure 1 set
Extruding unit 1 set
Feeding unit 1 set
Main engine control unit 1 set
Cut granule control unit 1 set
Mold-head 1 set
Cooling machine 1 set
II. Major Design Data
Diameter of screw: 240mm
The major axis rate of screw: 18:1(L/D)
Structure of screw: the cone in difference diameter, deepening, and pegging type.
Main screw rotate speed (r. p. m): 20-160
Capacity: 100-160kg/hr
The power of main electric machine: 30KW
Total power of heating machine: 12KW
Power of pelletizing knife electric machine: 3KW
Total capacity of electric: 30KW
Water sink: 0.45m×3.6m
Used material: EPE leftover material LDPE
Hauling speed: 300-400r/min
Specification of power: 380 × 50/60HZ × 3 phases
III. Demand of Public Project
Electric power: about 50KW
Cooling water: 0.5M3/H
Pelletizing machine power: 3KW
Installation size: approx: 8000×600×1200mm
IV. Specification of Each Part
A. Steel rack structure: 1set, 240×600mm
B. Extruding unit 1 set
a) Deceleration box 200-12.5
--Model: helical gear without pole
--Material: forgeable iron
--Box body: FC20
-- Gear wheel: hard gear (special polishing and heating)
-- Motor 15KW, AC
Electromagnetism timing 0 to 1500 turns/min
b) Barrel and screw
- Diameter: ¢240mm
- Material: 38CrMoAlA, alloy steel, nitrogen
- Heating area: 4 sets
- Heating method: aluminum heater & belt heater
C. Mould specification: 300×450mm
Heating area: 1 zone
D. Water cooling groove specification: 600×2400×400mm
E. Pelletizing part: 3KW electromagnetism timing
V. Spare Parts List
Heating panel 2 pieces
Thermocouple 2 pieces
Heater 1 set
Die head heating loop 1 piece
Tool box 1 set
Hexagonal socket 1 set
Flexible wrench 1 set
Fixed wrench 1 set
Main Model
| Model |
JC-XPS-HS160/90 |
JC-XPS-HS160/105 |
JC-XPS-HS160/120 |
JC-XPS-HS160/135 |
| Screw dia. |
mm |
Ø160/Ø90 |
Ø185/Ø105 |
Ø200/Ø120 |
Ø250/Ø115 |
| L/D rate |
|
4:1~8:1 |
4:1~8:1 |
4:1~8:1 |
4:1~8:1 |
| Screw speed |
r/min |
560/65 |
560/65 |
560/65 |
560/65 |
| Output |
kg/h |
60-90 |
100-150 |
150-180 |
200-250 |
| Installed power |
KW |
15-4 |
22-5.5 |
30-7.5 |
45-15 |
Company Profile
Chongqing Bishan Jiecheng Plastic Co., Ltd is located in Qinggang Industrial Zone, Bishan County, Chongqing,Company was founded in 1996.
Annual output of plastic machinery is more than 3,000 sets and plastic products 50,000 tons.
It is the first medium enterprise in western China to introduce the advanced technology from Germany, Italy, Japan and other countries to develop and innovate on the plastic machinery by themselves.
){kind=link}